Buying Miao should choose a regular manufacturer of seedling production licenses in the region, and the surplus surface is not damaged, clean and non-mucus, blew the integrity, the body is naturally stretched, strong in vitality, and is sensitive to the exteal stimulation. The smaller the sea cucumber, the worse the tolerance ability of low temperature, the more severe the dirty, the skin ulceration and death.

At the same time, the upper and lower water layers may lead to layers, and the decomposition of organic matter is consumed in large amounts of oxygen in the underlying sea cucumber and the decomposition of organic matter, the water quality is deteriorated, and even hypoxia is lacking. In the early days, in the beginning of the ice, it should increase the water throughout the water,Wholesale Prawn Pond Aerator Manufacturers and change the "old water" in the pond. In the sealing period, the pool should also be patrolled regularly, if the water is not enough or the pond is not allowed to leak water due to leakage gates, it can increase the water level. Studies have shown that the sea cucumber of different specifications is obvious to low temperature tolerance.

The northe pond usually begins in the beginning of December. After the management of the ice, the seafood has generally declined, and the resistance to disease resistance is also reduced. Water quality after chemical ice is very important. As long as you carefully prepare, you will be able to get together from the choice of seedlings, water quality management, and the sea cucumber must be safe, reduce or avoid the occurrence of disease, and achieve good breeding effects and considerable economic benefits.

In low temperatures below 0 ° C, there is only 30% of the sea-ginseng campaign below 2000 head / catties, while 300 heads / Pound of the seedlings of the seedlings can reach 80% -90%. The water supply gate is higher than the bottom of the pool, and there is a deep "dead water" in the water exchange.

The terrain of the pool is uneven, and the water in the pool is different. At this point, the water-rehabilitation should be increased, and there is water in the case of the water quality of the water source. The seedlings should be shocked on the artificial reef. The seedling specification should not be small. 

امتیاز بدهید :

When the oxygenating machine is underwater, the whole should be maintained in water in the water to prevent the gear veneer from venting oil. A oxygen pump: due to its light, easy to operate, and single oxyhabal function, suitable for water depth at 0. The oxygen generator type and load is generally determined according to the depth, area and pool shape.

Motor Application Ou Zigang Check Insulation, and check if the terminal is safe, whether the wire is damaged; the gearbox should check the gear, the axle, etc. Sprinkle oxygen control: rapidly increase the oxygen content of the surface water in a short period of time, as well as art oamental effects, suitable for the use of fish in the garden or tourist area. The oxygen generator parts manufacturers have organized some common fish pond oxygen generators and their operational methods.

At the start of the oxygen plane, Wholesale Pond Farming Water Aerator Factory it should be observed to observe the steering and operation, if there is abnormal sound, steering reverse, running inequality, should be stopped immediately, and the abnormal phenomenon should be tued on.

Therefore, in summer, autumn fever, insist on improving water quality; rainy day, cloudy next day, open, no boat; even in the middle of the night, until the sunrise stop; fish fast growing season insists on booting every day, guarantee the pond Higher oxygen; fish float should be tued on in time to stop after the float will be stopped.

The working conditions of the oxygen generator are harsh, and the user should be equipped with a thermal circuit, a thermistor protector, and an electronic protection device. The oxygen generator should maintain maintenance of the whole machine every year to ensure normal operation in the coming year. 

امتیاز بدهید :

Sixth, river sewage management skills have passed abundant aeration and mixing, so that the active sludge is in an outstanding suspension state, the wastewater is in contact with the active sludge, and the oxygen microorganism can be supplied to oxygen and dissolve oxygen (DO) in progress water to ensure normal microorganisms. 10, low temperature: can run for a long time.

Suitable for salty water and freshwater breeding and industrial wastewater treatment. At the same time, there is a function of watering, stirring, aeration.Soft start: Start slowly, will not damage fish shrimp. 380V1. Density, accelerated fish growth, is a must-have mechanical machinery for high yield.5kg / kW. This product is more than 20% higher than the conventional motor, and the performance is greater than the traditional 3KW oxygen generator, light weight, easy to carry and installation, and is a highlight of the product.

The oxygen principle is different from the impeller and the water-type, the unique flower-shaped spiral impeller,Wholesale Plastic Automatic Fish Feeder Manufacturers with the ring-shaped floating cylinder, which can make the output water upward, resulting in a certain region of the water body to boiling, because improved water in the eruption process and air Contact, thereby increasing the oxygen content of the water body.0kW effect.2kW effect, close to.

Energy saving: 30% over the same power contemporary machine. During use, the upper and lower hydrotective exchange can be formed such that the upper and lower layer of water can be uniform, which can promote the growth and reproduction of the floating plant, and improve the quality of the aquaculture.

The oxygen generator can form an oxygen ring for about 10 meters centered by an oxygen generator in the water body. High-performance permanent magnet frequencyover oxygen generator of the oxygen generator: 1.5KW, voltage 150V_250V.5kW reaches ultra-low voltage is normal operation: 220V1. 

امتیاز بدهید :

The total length of the aeration pipe is around 60 meters, the tube spacing is about 10 meters, and the high and low phase difference does not exceed 10 cm, fixed, 10 to 15 cm from the pool.Compared with the traditional oxygen plane, microporous oxygen is in the water, the motor is on the shore, there is no possibility of leakage in water.

There are two main types of installation.2.2 kW high-performance oxygenated equipment, an effective oxygen surface is 30 to 40 mu. Third, the structural and mounting microporous oxygenation facilities mainly include hosts (electric machines), Roots filling (speed 1400 rpm), gas storage buffer, supervisor (PVC plastic tube), branch (PVC plastic tube or rubber hose) , The aeration tube (microporous nano-exposure) and the like.15 kWh, the disk can be 4 ~ 6 mm diameter steel, the aeration pipe is fixed on the box, and the total length of the disk is 15 ~ 20 meters, 3 to 4 per acre,

The total length is 30 meters,and fixed, 10 to 15 cm from the bottom of the pool. The disc installation method is equipped with a power.The motor does not damage the motor and affecting oxygen by waste. Roots drums are regularly lubricated.It is found that the microporous rupture is changed in time.

The bubbles are sufficiently dissolved in the gas, and the oxygen is fully dissolved in the water, and can also cause the rotation of the water flow and the upper and lower flow, China Long Arm Aerators Manufacturers and the upper and lower flow of the water flow will be in the upper layer, and the flow of the water flow will flow micropores.

After a day, it is tapped, shakes the attachment, or soaked with 20% of the washing powder for 1 hour and then washed, dry and reuse. Since the oxygenation can improve and stabilize the water quality, reduce the generation of stress and other diseases, increase the survival, increase appetite and growth. The production cycle ends, and the warehouse is stored.

امتیاز بدهید :